Tag: specs

Peristaltic pump BABYFISH AB13 specs

Simone Leave a comment

peristaltica

  • Applicable power: DC6V ; Non-load current :100mA
  • Working current: 170mAh (?? measured 110mA @ 5V)
  • Working environment: temperature 0-40 ° C, relative humidity <80%
  • Flow direction: both ways
  • Flow range :MAX 100ml / min (I measured around 30ml/min)
  • Motor size: Diameter 32 * Height 23 (mm)
  • Pump head size: 42*42*21(mm)
  • Standard pump tube: inner diameter 3* outside diameter 5(mm)
  • Product Weight: 65g
  • Hole pitch for set-up: 49mm
  • 24 hours soak test is recommened for pump tube before the use of acid / alkali medium.
  • Head: 5m above (vertical height)
  • Suction: 5m above (vertical height)
  • Minimum starting voltage: DC 2.5V

6V Micro Submersible Water Pump Tests

Simone Leave a comment
DC 3-6V Micro Submersible Water Pump. Cheapest model I could find.
Some specs gathered around the web:
  • DC Voltage: 2.5-6V
  • Maximum lift: 40-110cm / 15.75″-43.4″
  • Flow rate: 80-120L/H
  • Outside diameter of water outlet: 7.5mm / 0.3″
  • Inside diameter of water outlet: 5mm / 0.2″
  • Diameter: Approx. 24mm / 0.95″
  • Length: Approx. 45mm / 1.8″
  • Height: Approx. 30mm / 1.2″
  • Material: engineering plastic
  • Driving mode: brushless dc design, magnetic driving
  • Continuous working life of 500 hours

Some specs I measured:

  • Requires about 500mA @ 5V when starting
  • About 150mA @ 5V working current
  • Minimum current about 50mA @ 5V